Petzval field curvature

Optical aberration
Distortion
Spherical aberration
Coma 
Astigmatism
Petzval field curvature
Chromatic aberration

Defocus
Piston
Tilt
Not to be confused with flat-field correction, which refers to brightness uniformity.

Petzval field curvature, named for Joseph Petzval, describes the optical aberration in which a flat object normal to the optical axis (or a non-flat object past the hyperfocal distance) cannot be brought into focus on a flat image plane.

Consider an "ideal" single-element lens system for which all planar wave fronts are focused to a point a distance f from the lens. Placing this lens the distance f from a flat image sensor, image points near the optical axis will be in perfect focus, but rays off axis will come into focus before the image sensor, dropping off by the cosine of the angle they make with the optical axis. This is less of a problem when the imaging surface is spherical, as in the human eye.

Most current photographic lenses are designed to minimize field curvature, and so effectively have a focal length that increases with ray angle. However, film cameras could bend their image planes to compensate, particularly when the lens was fixed and known. This also included plate film, which could still be bent slightly. Digital sensors generally cannot be bent, though large mosaics of sensors (necessary anyway due to limited chip sizes) can be shaped to simulate a bend over larger scales.

The Petzval field curvature is equal to the Petzval sum over an optical system,

\sum_i \frac{n_{i%2B1} - n_i}{r_i n_{i%2B1} n_i}

where r_i is the radius of the ith surface and the ns are the indices of refraction on the first and second side of the surface.[1]

See also

References

  1. ^ http://books.google.com/books?id=OJrJrEJ-r9QC&pg=PA4&lpg=PA4&dq=Petzval+sum&source=bl&ots=YZ1jaKy33E&sig=XAJAI2UHlGkTDyZUCsb-u95-P5s&hl=en&ei=DNnTTuW4LPC40gHN463HCA&sa=X&oi=book_result&ct=result&resnum=4&ved=0CC8Q6AEwAw#v=onepage&q=Petzval%20sum&f=false